PunCube MagSafe Wallet Guide: Card Capacity, Thickness, Weight, and iPhone Fit

The PunCube MagSafe Wallet is a complete phone-attached Mech Wallet configuration measuring 98 by 60 by 10 millimeters and weighing 75 grams when empty. It holds up to six flat cards or five embossed cards. PunCube currently lists compatibility with the iPhone 12, 13, 14, 15, 16, and 17 families.

Those figures belong to the MagSafe Wallet with its attachment setup. The standalone aluminum Mech Wallet is 53 grams and 8 millimeters before accessories. Keeping the two configurations separate prevents a common comparison error, since the smaller figures do not describe what hangs on the back of the phone.

We checked the current PunCube MagSafe Wallet, MagSafe Module, and Mech Wallet pages on September 7, 2026. Phone cases and device shapes vary, so model compatibility is the start of the fit check. The actual case and the way the phone is carried finish it.

The complete MagSafe configuration at a glance

Detail	Current published figure
Empty size	98 by 60 by 10 mm
Empty weight	75 g
Material	6063 aluminum
Card capacity	6 flat cards or 5 embossed cards
Phone compatibility listed by PunCube	iPhone 12 through iPhone 17
Android use	MagSafe-compatible case or ring required
Drive choices	Wasteland Clicky, Horizon Smooth, Ripple Quiet
Main chamber	RFID blocking
Included	Money Clip

MagSafe in this product refers to the magnetic attachment between the wallet and a compatible phone or case. The card access mechanism remains part of the Mech Wallet. Push the side drive and the cards rise in a staggered fan while the wallet is attached, or detach the wallet and use it as an independent front-pocket cardholder.

What the MagSafe setup adds

The standalone Mech Wallet and the MagSafe Wallet share the same card capacity. Both hold six flat cards or five embossed cards. The MagSafe configuration adds a way to keep the wallet on the back of a compatible phone.

That changes how many separate items need to be picked up before leaving. It can also keep the cards close to the phone during short trips. The value comes from that physical arrangement. Someone who always keeps a phone in one pocket and a wallet in another will gain less from the module.

The complete setup stays 98 millimeters long and 60 millimeters wide. Thickness rises from 8 millimeters on the base aluminum wallet to 10 millimeters on the MagSafe Wallet. Empty weight rises from 53 grams to 75 grams. The attachment therefore adds 2 millimeters and 22 grams to the published empty configuration.

Cards add their own weight and thickness to the daily carry. The phone and case also determine how the combined item feels in one hand. Compare the complete phone, case, wallet, and card stack instead of judging the 75-gram wallet alone.

Which iPhones fit

PunCube's current product page lists the iPhone 12, 13, 14, 15, 16, and 17 generations. Buyers should still check the exact model and case. A case without MagSafe support can weaken or prevent the intended attachment, while a MagSafe-compatible case provides the matching magnetic interface.

The safest fit test uses the phone exactly as it is carried. Attach the loaded wallet to the installed case. Hold the phone normally, place it in the usual pocket or bag, and remove it several times. The wallet should sit flat against the case without another accessory caught between the two surfaces.

Camera position and phone width can affect how a wallet-sized accessory sits on the back. The PunCube body measures 98 by 60 millimeters, so a smaller phone will feel more covered than a large model. PunCube's generation list confirms intended compatibility, while the physical dimensions help a buyer picture the footprint.

An Android phone can use the wallet with a MagSafe-compatible case or ring. PunCube states this in the current MagSafe Wallet FAQ. The case or ring supplies the compatible attachment surface, so its installation and hold become part of the setup.

Six flat cards or five embossed cards

The MagSafe configuration keeps the standard Mech Wallet chamber. Six flat cards fit within the published limit. A stack with raised numbers reaches the five-card embossed limit sooner because the high areas add thickness.

Metal cards, cards in sleeves, and card-shaped trackers should be counted by their actual thickness. A mixed stack may reach the practical limit before six pieces. The drive should move freely and present a usable fan without requiring the cards to be forced into the chamber.

MagSafe does not increase card capacity. Buyers who need seven to nine cards should look at the complete Bifold configuration, which is rated for up to nine cards and provides separate storage for cash and an access card. Our PunCube card capacity guide explains the difference between flat, embossed, and Bifold loads.

One-handed card access while attached

The side-slide action is the main reason this wallet can stay useful on a phone. The thumb moves the drive, and the cards rise from the chamber in a staggered fan. A buyer does not need to remove the complete stack just to reach one card.

One-handed access still depends on grip. A smaller hand may hold the phone and operate the drive differently from a larger hand. Load the cards in the order that matches actual use, with frequent payment or identity cards placed where they are easiest to select from the fan.

The wallet blocks RFID and NFC signals around cards in the metal chamber. An office badge or transit pass stored there must leave the chamber before scanning. MagSafe attachment does not create an external tap-ready slot. Buyers who need a card to scan through the wallet should consider the quick-access slot on the Bifold configuration.

Three ways to carry the same wallet

With phone-attached carry, the wallet and phone move as one item during commuting, errands, or a short outing. The loaded phone becomes thicker and heavier, so pocket space and hand comfort deserve a real check.

Detaching the wallet leaves the MagSafe hardware in place and lets the cardholder move into a front pocket. This can be useful when the phone needs to charge, sit in a mount, or stay in a hand without the cardholder attached. The one-handed card action continues to work in that position.

A third pattern keeps the wallet detached most of the time and uses the magnetic connection only when convenient. A buyer who rarely attaches it may find the lighter 53-gram base Mech Wallet more sensible.

These patterns solve different problems. Attachment reduces the number of separate objects. Detachment gives the phone and wallet independent jobs. Front-pocket use keeps the familiar compact-wallet routine available whenever the combined carry feels too large.

Drive feel still matters

The MagSafe Wallet is currently offered with the same three aluminum drive styles. Wasteland is Clicky and gives a crisp pinball feel. Horizon is Smooth with a clean sliding action. Ripple is Quiet with subtle magnetic feedback.

All three reveal the same card stack and share the same MagSafe configuration measurements. The difference appears each time the thumb operates the wallet. Wasteland suits someone who wants audible mechanical feedback. Ripple fits shared or quiet spaces. Horizon gives a smoother middle path.

Read the full Wasteland, Horizon, and Ripple comparison before choosing a drive. Sound is especially relevant when the wallet stays attached to a phone that may already be used throughout meetings, travel, and other shared settings.

The included Money Clip and accessory combinations

The current MagSafe Wallet product page lists a Money Clip as included. PunCube has confirmed that the current Horizon configuration can use the MagSafe Module and Money Clip together. That makes Horizon the documented choice for a buyer who wants phone attachment and a small external cash carry in the same setup.

Compatibility should stay tied to a named current configuration. Bifold, MagSafe, and AirTag modules create different screw-fixed builds. Avoid assuming that every module, drive, and clip arrangement can be stacked together. The PunCube Mech Wallet accessories guide separates the job of each option.

A few folded bills can sit in the Money Clip without using card positions in the metal chamber. Larger cash loads and coins point toward Bifold. The MagSafe configuration remains strongest when phone attachment is the main reason for adding hardware.

Who should choose the MagSafe Wallet

Choose the MagSafe Wallet when the everyday card stack stays within six flat cards or five embossed cards and keeping the wallet on a compatible phone makes the carry easier. It is a natural fit for short trips, front-pocket minimalists who want a detachable option, and people who already use a MagSafe-compatible case.

Choose the base Mech Wallet when lower empty weight and thickness matter more than phone attachment. It saves 22 grams and 2 millimeters before cards while keeping the same chamber capacity and drive choices.

Bifold fits card counts from seven to nine and loads where cash, coins, or a tap-ready access card need separate places. These configurations solve different storage problems, so the correct comparison starts with what must enter the pocket each day.

Frequently asked questions

Is the PunCube MagSafe Wallet 53 grams

No. The complete MagSafe Wallet weighs 75 grams when empty. The 53-gram figure belongs to the standalone aluminum Mech Wallet before accessories.

Is the complete MagSafe Wallet 10 millimeters thick

Yes. PunCube currently publishes a 98 by 60 by 10 millimeter size for the complete empty MagSafe configuration.

Does MagSafe add more card capacity

No. It keeps the standard limit of six flat cards or five embossed cards. The Bifold Wallet is the PunCube configuration rated for up to nine cards.

Can it work with an Android phone

Yes, when the phone uses a MagSafe-compatible case or ring. Check the case or ring installation and test the loaded wallet's hold before daily carry.

Can an access card scan from inside the wallet

No. The metal chamber blocks RFID and NFC signals. Remove the card for scanning or use a configuration with an external quick-access slot.

Can the wallet still be carried without the phone

Yes. Detach it and use it as an independent compact cardholder. The mechanical drive and card chamber continue to work away from the phone.

Explore the complete PunCube MagSafe Wallet or compare the standalone PunCube Mech Wallet.